High Pressure Dredging Slurry Sand Single Stage Vertical Inline Circulation Pump

Product Description

Single Stage Vertical Inline Circulation Pump

Product Description

Product Presentation

-MSP heavy duty sump pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abraisive and high density slurries from sumps, pits and other submersible sources.

-Models are available in sizes ranging from 40mm to 250mm discharge and are capable of flow rates from 5 to 350 litres per second (79-5540 USGPM) at heads of up to 40 metres (130ft). The heavy duty design of the MSP pumps allows the passage of large particles with a diameter of up to 50mm.

-Pumps will continue to operate even when the top inlet is not submerged, allowing the liquid level to to be lowered to the bottom of the sump or pit. Suction extension pipes of up to 2metres in length can be added to the bottom inlet of the pump to extend the pumping depth.

-Designed as a fixed installation the MSP provides reliable pumping performance with minimal maintenance requirements and simple servicing.

Feature
 

CANTILEVERED SHAFT

The standard MSP pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.

HEAVY DUTY WET END 
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.

COLUMN AND DISCHARGE PIPES 
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.

VERSATILE DRIVE OPTIONS
MSP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.

REMOVABLE STRAINERS
MSP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.

"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.

Application

The MSP Heavy Duty Sump Pumps are capable of providing reliable and efficient performance for the transfer of abraisive and high density slurries from sumps, pits and tanks in a wide range of mining, processing and heavy industrial applications.

MSP/MSP(R) Sump Pump Clean Water Performance Table
TYPE	Allowable Mating Max Power	Material		Range of Performance					Impeller
		Liner	Impeller	Capacity (Q)		Head(H)	Max.Eff (%)	Speed (r/min)	NO. of Vanes	Impeller Diameter (mm)
				(m³/h)	(L/s)	(m)
40PV(L)-MSP	15	M	M	19.44-43.2	5.4-12	4.5-28.5	40	1000-2200	5	188
40PV(L)-MSPR		RU	RU	17.28-39.6	4.8-11	4-26	40	1000-2200	5	188
65QV(L)-MSP	30	M	M	23.4-111	6.5-30.8	5-29.5	50	700-1500	5	280
65QV(L)-MSPR		RU	RU	22.5-105	6.25-29.15	5.5-30.5	51	700-1500	5	280
100RV(L)-MSP	75	M	M	54-289	15-80.3	5-35	56	500-1200	5	370
100RV(L)-MSPR		RU	RU	64.8-285	18-79.2	7.5-36	62	600-1200	5	370
150SV(L)-MSP	110	M	M	108-479.16	30-133.1	8.5-40	52	500-1000	5	450
200SV(L)-MSP	110	M	M	189-891	152.5-247.5	6.5-37	64	400-850	5	520
250TV(L)-MSP	200	M	M	261-1089	72.5-302.5	7.5-33.5	60	400-750	5	575
300TV(L)-MSP	200	M	M	288-1267	80-352	6.5-33	50	350-700	5	610

 Note: "M": Wear-resistant Alloy. "RU": Rubber

Material 
 

Description	Standard Material	Material Options
Shaft	4140 Mild Steel	Available on Request
Bearing Housing	Cast Iron
Column	Mild Steel
Upper Strainer	Rubber	Cast Iron
Lower Strainer	Cast Iron
Back Liner	27% Chrome White Iron
Pump Casing	27% Chrome White Iron	Rubber Lined White Iron
Impeller	27% Chrome White Iron	Rubber
Discharge Pipe	Mild Steel	Rubber Lined Mild Steel/ Composite
Adaptor Plate	Mild Steel

FAQ

A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 


Welcome inquiry!